DC66P_Datasheet

This heavy duty DC monoblock reversing contactor is a new addition to the SW60 range of 80 Ampere Contactors. The DC66P is sealed to IP66 standards and is ideally suitable for use in small battery powered winches, vehicle mounted cranes, small electric vehicles, etc. Thermal current rating (100%): Up to 80 Ampere

Ignition Relays Datasheet

SW60P Continuous currents up to 80 Amperes

SU60P Continuous currents up to 100 Amperes

SW80P Continuous currents up to 125 Amperes

SAE1171

SW60Datasheet 

SW60 Single Pole, Normally Open, On / Off

SW61 Single Pole Changeover

SW63 Single Pole, Normally Closed, On/Off

SW64 2 x SW60 on a common bracket.

SW66 2 x SW61 on a common bracket with links for motor reversing.

PC60 Datasheet

PC60  PCB mounting, Single Pole, Normally Open, On / Off

PC61 PCB mounting, Single Pole, Changeover

PC63 PCB mounting, Single Pole, Normally Closed, On/Off

MB60 Datasheet

MB60 PCB mounting, Single Pole, Normally Open, On / Off

MB61 PCB mounting, Single Pole, Changeover

MB63 PCB mounting, Single Pole, Normally Closed, On / Off

SW80-DC88-SW88-SW90-SW90 Datasheet

SW80 Single Pole Single Throw, Normally Open

SW80P S.P.S.T. Protected Normally Open

SW82 Double Pole Single Throw Normally Open

SW82P D.P.S.T. Protected, Normally Open

SW822 Paired Double Pole Single Throw Normally Open

SW822P Paired D.P.S.T. Protected Normally Open

SW84 Single Pole Double Throw

SW85 Single Pole Single Throw Normally Closed

SW85P S.P.S.T. Protected Normally Closed

SW86 2 x SW84 on Double Bracket

SW80-DC88-SW88-SW90-SW90 Datasheet

DC88 Monoblock S.P.D.T. for Motor Reversing

DC88P Monoblock S.P.D.T. Protected for Motor Reversing

SW88 Paired S.P.D.T. on Double Bracket for Motor Reversing

SW90 SW80 & SW84 on Double Bracket

DC92 Monoblock, 2 x SW80

DC92P Monoblock, 2 x SW80P

SW92 2 x SW80 on Double Bracket

SW92P 2 x SW80P on Double Bracket

SW93 2 x SW85 on Double Bracket

SW93P 2 x SW85P on Double Bracket

SW95 SW80 & SW82 on Double Bracket

SW95P SW80P & SW82P on Double Bracket

SW96 SW80 & SW85 on Double Bracket

SW180-SW190 Datasheet

SW180 Single Pole Single Throw Normally Open

SW181 Single Pole Double Throw Changeover

DC182 Monoblock S.P.D.T. Motor Reversing

SW182 Paired S.P.D.T. on Double Bracket Motor Reversing

DC184 Monoblock, 2 x SW180

SW184 2 x SW180 on Double Bracket

SW185 Single Pole Single Throw normally closed

SW189 2 x SW185 on Double Bracket

SW190 Double Pole Single Throw normally open

SW192 Paired Double Pole Single Throw for Motor Reversing

SW150&SW250 Power Distribution Centres

SW150 Thermal Current Rating 100% up to 150 Ampere

SW250 Thermal Current Rating 100% up to 250 Ampere

SW200 Datasheet

SW200 Single Pole Single Throw Normally Open

SW201 Single Pole Double Throw Changeover

SW202 Paired S.P.D.T. on Double Bracket Motor Reversing

SW204 2 x SW200 on Double Bracket

SW205 2 x SW201 on Double Bracket

SW208 3 x SW200 on Triple Bracket

SW210 Single Pole Single Throw Normally Closed

SW213 3 x SW210 on Triple Bracket

SW214 2 x SW210 on Double Bracket

SW280 Single Pole Single Throw Normally Open, Hybrid SW180 Coil with SW200 Top Cover

SW284 2 x SW280 on Double Bracket

The new SW225 has been specifically designed to mount within the confines of a 1U rack. This bus-mountable compact contactor follows the recognized design of the SW250 series contactor. To suit the limitations of space of a 1U rack, the coil connections are supplied as flying leads (up to 125mm)

SW260 Single Pole, Single Throw Normally Open, Continuous Thermal Current Rating 300A

SW500 Single Pole,Single Throw Normally Open, Continuous Thermal Current Rating 500 A

SW560 Single Pole, Single Throw Normally Open, Continuous Thermal Current Rating 600A

SW600 Single Pole, Single Throw Normally Open,Continuous Thermal Current Rating 600A

SW800 Single Pole, Single Throw Normally Open, Continuous Thermal Current Rating 800 A

SW1000 Single Pole, Single Throw Normally Open, Continuous Thermal Current Rating 1200 A

SW1002 Single Pole, Double Throw, Changeover, Continuous Thermal Current Rating 1200A

SW1500 Single Pole, Single Throw Normally Open, Continuous Thermal Current Rating 1800 A

Auxiliary contacts. A set of auxiliary contacts (one normally open, one normally closed) mechanically linked to the main contacts.
Magnetic blowouts. Protects against sustained arcs; recommended at 48 volts DC and higher.
Coils for continuous operation. Allow continuous energization of the coil, compared with standard coils rated for intermittent operation (ON time under 70 percent and less than 15 minutes).

Mounting brackets. A wide selection of standard brackets for easy installation anywhere; customized brackets and hardware for special applications are available.
Coil suppression. Diode suppresses voltage spikes when coil is de-energized. Because this slows the contacts drop-out time, resistor/diode combinations are available to minimize this effect.
Enclosed top cover. Protects contacts from dust and other contaminants (not recommended with use of magnetic blowouts).
AC operated coil. DC coil fitted with bridge rectifier for use with AC power.
Large diameter contact tips. Increased surface area minimizes contact corrosion from high switching frequencies.
Lockable mechanism. A manual disconnect switch that – once engaged to the OFF position – can only be rearmed with the supervisor’s key.
Metal enclosed contactors. Available for industrial vehicle applications requiring UL-EE rating.