|
| |
DC Shunts
Got a Question?
| DC
AMMETER SHUNTS |
Selection |
| Selection Guide
| Type of Product |
| Base Mounted Shunts |
TYPE
LA - Lightweight - 5 to 150 Amps, 50 and 100 mV
TYPE LB - Lightweight - 170 to
600 Amps, 50 and 100 mV
TYPE LC - Lightweight - 800 to
1,200 Amps, 50 and 100 mV
TYPE C - Switchboard - 1 to 500
Amps, 50 and 100 mV
TYPE LAB - Laboratory Portable
- 10 to 1,000 Amps, 50 and 100mV
TYPE GB - Weschler Equivalent -
10 to 1,000 Amps, 50 and 100 mV |
| Bus - Bar Shunts |
TYPE
A - Solid End Block - 1,500 to 6,000 Amps, 50 and 100 mV
TYPE R - Multi-Fin Design -
1,000 to 2,000 Amps, 50 and 100 mV
TYPE H - Multi-Fin Design -
2,500 to 30,000 Amps, 50 and 100 mV
TYPE K - Multi-Fin Design - 600
to 10,000 Amps, 50 and 100 mV
TYPE M - Single Fin Design - 300
to 1,000 Amps, 50 and 100 mV
TYPE G - Multi-Fin Design -
3,000 to 10,000 Amps, 50 and 100 mV |
Type 860 Shunts
Designed to DIN Requirements
| TYPE
860 A - Solid End Block - 1 to 150 Amps, 60 and 150 mV
TYPE 860 B - Solid End Block
- 151 to 2500 Amps, 60 and 150 mV
TYPE 860 C - Solid End Block
- 2501 to 15,000 Amps, 60 and 150 mV |
| Heat Sink Mounted Shunts
| TYPE
TMH up to 200 Watts - Dissipation 0.03 to 0.0015 Ohms
TYPE THA up to 400 Watts -
Dissipation 0.1 to 0.0175 Ohms
TYPE THB up to 400 Watts -
Dissipation 0.03 to 0.0001 Ohms |
| Shunts Without Base
| TYPE
G - Switchboard - 75 to 2,500 Amps, 50 and 100 mV
TYPE V - Switchboard - 15 to 600
Amps, 50 and 100 mV
TYPE E - Switchboard - 300 to
1,200 Amps, 50 and 100 mV
TYPE F - Switchboard - 100 to
600 Amps, 50 and 100 mV
TYPE FL - Switchboard - 1,000
to 3,000 Amps, 50 and 100 mV |
| Printed Circuit Board and Adjustable
Shunts
| TYPE
PCS - 10 to 75 Amps, 50mV
TYPE AS - 35 to 140 Amps, 50 mV
TYPE ASB - 35 to 225 Amps, 50
mV |
| Information Pages
| Page
1 - General Information / Characteristics of Manganin
Page 2 - Shunt Selection
Guide / Design Considerations
Page 3 - Duty / Ambient
Page 4 - Temperature Rise /
Environment / Conclusion
Page 5 - Custom Applications
/ Other Fine Products |
|
